Thu Dau Mot University Journal of Science


Articles

Volume 2 (Issue 3 - 2020)


Study on design and fabrication of a prototype equipment used for corrosion inspection on petrochemical tank bottom by magnetic flux leakage method

By Dang Quoc Trieu, Vuong Duc Phung, Bui Trong Duy, Tran Minh Tien, Lai Viet Hai, Tran Trong Hieu
Published online 15/09/2020
DOI: 10.37550/tdmu.EJS/2020.03.065
Corrosion of the bottom of the petroleum tank may lead to a product leak that could cause a fire or explosion resulting in damage to people and the environment, therefore the test of tank bottom corrosion is necessary to be conducted periodically to prevent the occurrence of the above problems. In non-destructive inspection, the Magnetic Flux Leakage (MFL) method relies on the variation of fluxes caused by defects on the surface of materials to detect corrosion, pitting, or imperfections, which is proved quite effectively with low cost. The project was implemented to develop a prototype of the MFL bottom detection device based on the research results in the world to improve corrosion survey capacity in industrial equipment, as well as to improve the expertise in the Research Team of electronics and automation in the fields of magnetic fields and sensors. As a result, an MFL model using permanent magnets and Hall sensors were fabricated. Survey experiments showed that the machine could detect corrosion defects up to 20% of steel wall thickness in the scanning speed range from 500 mm/s to 1130 mm/s. However, to meet the actual survey needs, the team must continue to improve the device in terms of sensitivity, scanning speed, the ability to operate automatically or semi-automatically, and register for a fire safety inspection.
The paper presents general theory about making small models for studying large machines. Here, the author refers to the design of pile driving and pressing machines. To express ideas, the author presents design drawings presented in three-dimensional perspective. Currently, pile drivers and pile presses are two separate machines, in which their base machine is the same, their working parts are slightly different. The author takes advantage of the slight differences to combine them into one machine, so as to ensure that this machine is able to pile or pile. In addition, the structure of pile making and pressing machines is created by the author, which is somewhat simpler than the current construction and driving machine. This successful study will form the basis for manufacturing a pile driving machine and pile machine into a single machine, greatly reducing the costs of procurement and construction machine use.

Building the environmental performance index for industrial parks

By Phong Tran, Thuy Nguyen Thi Thanh, Pham Quoc Khanh, Than Nguyen Hien
Published online 15/09/2020
DOI: 10.37550/tdmu.EJS/2020.03.067
Measuring environmental protection activities is a matter of great concern over the years. In this study, the indicators for evaluating environmental protection activities in industrial parks was built according to the PDSIR model and based on Vietnam's legal framework, including 18 main subjects and 35 indicators. The environmental performance index of industrial park (EPIIP) was established based on the multi-criteria evaluation method and the analytic hierarchy process method. The results of the study indicated that the VSIP I industrial park reached 68.95 points (relatively good level). Moreover, the results also showed that VSIP I was one of the industrial parks practicing good performance to protect environmental problems.
Variable Frequency Drives (VFDs) are electronic power controllers that allow for accurate control of the speed of alternating current (AC) induction motors that used in many kinds of machines including fans, pumps and compressors. These motors are used in most heating, ventilation and air-conditioning (HVAC) systems and account for a significant percentage of the total HVAC energy consumption. More efficient operation of these motors using VFDs can result in significant energy savings. Besides, the communication between VFDs and PLC for Supervisory Control And Data Acquisition (SCADA) is also important. Modbus protocol has many kinds as RS485, RTU, Profinet,...In this paper we will present the communication between a PLC Siemens S7-1200 and an ATV310 Drive (Schneider) via Modbus RTU protocol which is supported.
Men's grooming products are very diverse and plentiful in the world today. In recent years, Vietnamese men have approached beauty trend, the old conception of beauty is also gradually changing. The demand for male beauty in Vietnam in recent years indicates that men's awareness of beauty products. The potential for grooming products for men in Vietnam is huge, but in-depth studies on this topic are limited. It is important to have specific studies analyzing the consumption of grooming products for men in Vietnam, contributing to promoting the potential of these products for business benefits. The study collected data from 458 respondents are male, analyzed the factors affecting consumer attitudes, thereby opening a specific view on men's grooming consumption in Vietnam.
Across the world, the first accounting course provides serious challenges for teaching. These arise from powerful negative perceptions which include the anxiety associated with tertiary-level study and the differing backgrounds or majors of students required to take the course. This paper outlines some examples of nontraditional teaching techniques and highlights how the course could be best structured to overcome such negative views while at the same time responding to the changes in the industry. The design and content of the proposed course emphasizes the USER approach and is directed to English as second language learners. This is a case study in an Australian offshore campus and is the end result of the progressive improvement in the structure and delivery of the course.


Publication Information

Publisher

Thu Dau Mot University, Viet Nam

Honorary Editor-in-Chief and Chairman of the Editorial Board

Assoc. Prof. Nguyen Van Hiep

Deputy Editor-in-Chief

PhD. Trần Hạnh Minh Phương
Thu Dau Mot University

Editorial Board

Prof. Tran Van Doan
Fujen University, Taiwan
Prof. Zafar Uddin Ahmed
Vietnam National University Ho Chi Minh City

Prof.Dr. Phillip G.Cerny
The University of Manchester, United Kingdom
Prof. Ngo Van Le
University of Social Sciences and Humanities (VNU-HCM)

Prof. Bui The Cuong
Southern Institute of Social Sciences​​​​​​​
Prof. Le Quang Tri
Can Tho University

Assoc. Prof. Nguyen Van Duc
Animal Husbandry Association of Vietnam
Assoc. Prof. Ted Yuchung Liu
National Pingtung University, Taiwan

PhD. Anita Doraisami
Economics Monash University, Australia
Prof. Dr. Andrew Seddon
Asia Pacific University of Technology & innovation (APU)

Assoc. Prof. Le Tuan Anh
Thu Dau Mot University
Prof. Abtar Darshan Singh
Asia Pacific University, Malaysia

Prof.Dr. Ron W.Edwards
The University of Melbourne, Australia
Assoc. Prof. Hoang Xuan Nien
Thu Dau Mot University

PhD. Nguyen Duc Nghia
Vietnam National University Ho Chi Minh City
PhD. Bao Dat
Monash University (Australia)

PhD. Raqib Chowdhury
Monash University (Australia)
PhD. Nguyen Hoang Tuan
Thu Dau Mot University

PhD. Nguyen Thi Lien Thuong
Thu Dau Mot University

Assistant

Nguyen Thi Man
Thu Dau Mot University