Corrosion of the bottom of the petroleum tank may lead to a product leak that could cause a fire or explosion resulting in damage to people and the environment, therefore the test of tank bottom corrosion is necessary to be conducted periodically to prevent the occurrence of the above problems. In non-destructive inspection, the Magnetic Flux Leakage (MFL) method relies on the variation of fluxes caused by defects on the surface of materials to detect corrosion, pitting, or imperfections, which is proved quite effectively with low cost. The project was implemented to develop a prototype of the MFL bottom detection device based on the research results in the world to improve corrosion survey capacity in industrial equipment, as well as to improve the expertise in the Research Team of electronics and automation in the fields of magnetic fields and sensors. As a result, an MFL model using permanent magnets and Hall sensors were fabricated. Survey experiments showed that the machine could detect corrosion defects up to 20% of steel wall thickness in the scanning speed range from 500 mm/s to 1130 mm/s. However, to meet the actual survey needs, the team must continue to improve the device in terms of sensitivity, scanning speed, the ability to operate automatically or semi-automatically, and register for a fire safety inspection.

The paper presents general theory about making small models for studying large machines. Here, the author refers to the design of pile driving and pressing machines. To express ideas, the author presents design drawings presented in three-dimensional perspective. Currently, pile drivers and pile presses are two separate machines, in which their base machine is the same, their working parts are slightly different. The author takes advantage of the slight differences to combine them into one machine, so as to ensure that this machine is able to pile or pile. In addition, the structure of pile making and pressing machines is created by the author, which is somewhat simpler than the current construction and driving machine. This successful study will form the basis for manufacturing a pile driving machine and pile machine into a single machine, greatly reducing the costs of procurement and construction machine use.

Measuring environmental protection activities is a matter of great concern over the years. In this study, the indicators for evaluating environmental protection activities in industrial parks was built according to the PDSIR model and based on Vietnam's legal framework, including 18 main subjects and 35 indicators. The environmental performance index of industrial park (EPIIP) was established based on the multi-criteria evaluation method and the analytic hierarchy process method. The results of the study indicated that the VSIP I industrial park reached 68.95 points (relatively good level). Moreover, the results also showed that VSIP I was one of the industrial parks practicing good performance to protect environmental problems.

Men's grooming products are very diverse and plentiful in the world today. In recent years, Vietnamese men have approached beauty trend, the old conception of beauty is also gradually changing. The demand for male beauty in Vietnam in recent years indicates that men's awareness of beauty products. The potential for grooming products for men in Vietnam is huge, but in-depth studies on this topic are limited. It is important to have specific studies analyzing the consumption of grooming products for men in Vietnam, contributing to promoting the potential of these products for business benefits. The study collected data from 458 respondents are male, analyzed the factors affecting consumer attitudes, thereby opening a specific view on men's grooming consumption in Vietnam.

Dipterocarpus dyeri is a typical plant of tropical evergreen moist forest at Southeast Vietnam. These plants have been planted popularly at parks and urban streets for the shade and it has been commonly materials for timber industry. Multiplication of Dipterocarpus dyeri at nurseries could face to some diseases, such as the withered disease cause serial death. Our study isolated three disease fungi strains from the root areas of the diseased Dipterocarpus dyeri planted Ma Da nursery, Dong Nai province. Result of 28s rDNA sequencing showed these fungi belong to Ophiostoma eucalypticagena, Aspergillus nidulans and Collectotrichum gloeosporioides. This result is base for conducting the following studies to control the withered disease on Dipterocarpus dyeri at the nursery.

In this paper, we study a class of parametric vector mixed quasivariational inequality problem of the Minty type (in short, (MQVIP)). Afterward, we establish some sufficient conditions for the stability properties such as the inner-openness, lower semicontinuity and Hausdorff lower semicontinuity of the solution mapping for this problem. The results presented in this paper is new and wide to the corresponding results in the literature

The study was conducted at Fuji Seal Vietnam Co., Ltd. to examine the exposure and health risks of workers working in the printing and ink phase area when exposed to solvent vapor through the respiratory apparatus Toluene, Methyl Ethyl Ketone, Ethyl Acetate, Isopropyl Acohol. The results show that: During the monitoring period from July to November 2016, the amount of solvent vapor in the printing area and ink phase is quite high, at the highest Toluene printing area, it was 2.63 times higher than the standard equal to the health risk HQ male is 2.61 and HQ female is 3.37; Ethyl Acetate exceeded the highest of 4.34 times equal to the male HQ risk ratio of 4.29 and female HQ equal to 5.53; MEK exceeds 8.43 times equal to the health risk HQ male is 8.36 and HQ female is 10.79; Isopropyl Acohol exceeds 8.4 times equal to the health risk HQ male is 8.33 and HQ female is 10.75; At the inking area, MEK exceeds 8.43 times equal to the health risk HQ male is 8.36 and HQ female is 10.79. From the calculated data - analysis, found that the health of workers working in the printing and inking areas had high risks, the ability of workers suffering from diseases such as he dache, dizziness, skin damage,... and especially respiratory failure.

The Southeast plays a very important role in Vietnam’s economic development. Despite a high concentration of social scientists in the Southeast region, there remains a paradox that the Southeast culture has not been sufficiently researched into. Applying the method of cultural zoning based on the changes of the three dimensions Subject – Space - Time developed by the author, the article concludes that the Southeast is a separate cultural zone besides the Southwest and lists some typical characteristics of the Southeast in terms of cultural elements (focusing on the organizational culture) and the system of cultural personality characteristics of Vietnamese people in the Southeast. An analysis of the Human Development Index (HDI) of the Southeast shows that this development is unbalanced and unsustainable. To achieve balance and sustainability, more investment must be made on the culture and the people; community-village type behaviors should be replaced by community-society type behaviors; and the urban way of living, the urban culture and good urban citizen character should be promoed while limiting the rural/agricultural lifestyle and characteristics.

Binh Duong has rapidly transformed during the period 1999-2009, from a agricultural province to industrial one. The paper explores the shift of occupation-based social structure of Binh Duong during that period. Using the data sets of Census 1999 and 2009, the paper analyses the evolution of the occupational figure in Binh Duong by ten occupational categories and four occupational strata, and the differences in this figure by residence, gender, ethnic, and religious variables. Findings show that the occupational structure of Binh Duong is more developed than the one of the Southern Key Economic Zone. Its change in rural areas is more significant than in urban areas. There are not considerable differences by gender, ethnicity, and religiousness. The findings are suggestive for a further analysis using the data set of Census 2019 on the evolution of occupational figures in Binh Duong during the previous twenty years (1999-2019).

In 2014, Binh Duong has 2.885 the Khmer people, being the second largest ethnic minority compared to the Hoa people. They have contributed to the multi-ethnic culture of Binh Duong. Hundreds of works on the Khmer in the Mekong Delta considered their culture as a typical of Theravada Buddhist culture in Vietnam but this proposition is not suitable for the Khmer community in An Binh, Phu giao district who is this object of this study. By qualitative data sources from in-depth interviews, participant observations and approach to the historical particularism, this study documented the cultural characteristics of the Khmer in An Binh and analyzed the factors that make culture of the Khmer in An Binh different from the culture of the Khmer in the Mekong Delta. Natural conditions and socio-historical context make the cultural practices of the Khmer in An Binh more similar to the culture of the ethnic groups in the Central Highlands than the Khmer culture in the Mekong delta, especially, customs and folk beliefs.

On the basis of coordinating the sources of history materials from Vietnam and China, together with the latest archaeological achievements of Ho citadel, the article has delineated territory, confirmed the chronology frame with the Kings of this kingdom in relation to post-Champa Empire. It is from the aftermath of Vijaya, the two parts of Aryaru (Phu Yen) and Kauthara (Khanh Hoa) belong to Hoa Anh Kingdom, in which, Le Thanh Tong is crowned as Ban La Tra Duyet; the rebellion of this King is the cause for the second conquest, formally taking Ling Chan/ Da Bia as the landmark; Trai A Ma Phat Am is designated as Hoa Anh’s King on the remaining land of Kauthara, but immediately incorporated into Panduranga, forming the state of post-Champa.