Environmental issues such as the wastewater have influenced each aspect of our lives. For human and environmental health protection, it is necessary to remove excess zinc in industrial wastewaters before discharging them to environment. Modified diatomite displayed larger surface area and pore volumes in comparison with untreated natural diatomite, which favored heavy metals sorption behavior. In this study, the removal of Zn(II) ions from aqueous solution was studied using Fe/Mn modified diatomite sample at different adsorption parameters such as contact initial metal ions concentration, dosage of Fe/Mn-Diatomite and ionic strength Na2CO3 on ionic Zn2+ adsorption capacity of diatomite modified. The residual zinc concentration in the solution was determined using flame atomic absorption spectroscopy. The results showed that: the gravitational increase increases with increasing time and then becomes almost stable, with 120 minutes timeliness; absorption increases when Fe/Mn-Ditomite is increased, absorption reaches 89.48% at a dose of 1.5 g/l; additional different concentrations Na2CO3 ranged from 0 ppm to 80 ppm the results showed that performance treatment Zn2+ of correspond 94,85%. This study could lay an essential foundation to develop modified diatomite for heavy metal removal from wastewater.

Seed coat macadamia preparation of activated carbon with chemical agent K2CO3 from macadamia shells as per ratio: K2CO3: distilled water = 1:1:10ml, optimal temperature condition 6500C and burning time 60 minutes. Efficiency removal of zinc (II) in wastewater efficiency (53.42%) with the concentration of 25ppm, conducted a survey at pH = 4.5 with 1.8g/l of carbon, treated in 100 minutes. Survey results have similarities with other studies and are applicable to application removal of zinc (II) in wastewater.